下载中心

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Vision Acquisition Software 2016.08 LabVIEW2016 Win32/64Eng 视觉采集软件VAS2016August下载

NI视觉采集软件，相机驱动程序，IMAQdx、IMAQ、千兆网相机驱动、1394相机驱动、USB相机驱动、CameraLink相机驱动、线扫描相机驱动等。适用于LabVIEW2016 X86/64、NI VISION2016、NI VBAI2015F1等。

文件大小: 2910645596 字节 (2.71 GB)
修改日期: 2016-08-04 11:49
MD5: 052ef6a7ddb6765d067c934446644c61（官方正确）
SHA1: ccc60dd6ad6db41b70d02e4c426b32321daea448
SHA256: 7b2bc890b4e2ef47a7a61a7c88f08e72e9973e3dffb906876ae9b49ab9ddfd23
CRC32: be6d70ae
NI Vision Acquisition Software August 2016
Download Language: English
Product Line: Vision Software
Version: August 2016
Release date: 08-01-2016
Software type: Driver
Operating system: Windows 8 32-bit; Windows 8 64-bit; Windows 7 32-bit; Windows 7 64-bit; Windows Vista; Windows XP 32-bit; Windows Server 2008; Windows Server 2003 R2 32-bit

百度网盘下载：
标准下载：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看
NI下载器下载：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看

NI官方下载地址：
标准下载地址：
请购买附件下载查看
NI下载器下载：
请购买附件下载查看

NI Vision Acquisition Software 2016.08 LabVIEW2016 Win32/64Eng 视觉采集软件VAS2016August下载

http://pcmv.cn/thread-14101-1-1.html?fromuid=9

(出处: 机器视觉论坛)

NI Vision Acquisition Software Readme

Overview

• NI-IMAQ is driver software for the following device types:
  

• NI 17xx smart cameras

• analog cameras

• parallel digital cameras

• Camera Link cameras
  

• NI-IMAQdx is driver software for the following device types:
  

• NI 177x smart cameras

• GigE Vision-compliant cameras

• USB3 Vision-compliant cameras

• IIDC/DCAM-compliant IEEE 1394 cameras

• DirectShow-compatible cameras

• Basler and Axis IP cameras
  

• NI-IMAQ I/O is driver software for controlling reconfigurable input/output (RIO) on image acquisition devices and real-time targets. The following hardware is supported by NI-IMAQ I/O:
  

• NI CVS-1457RT

• NI CVS-1458

• NI CVS-1458RT

• NI CVS-1459

• NI CVS-1459RT

• NI EVS-1463RT

• NI EVS-1464RT

• NI PCI-8254R

• NI PCIe-8255R

• NI PCIe-8237R

• NI PCIe-1473R

• NI PCIe-1473R-LX110

• NI 1483 FlexRIO Adapter Module
  

• Note: New versions of Vision Acquisition Software no longer support the following hardware:
  
  

• NI 1762 and 1764 Smart Cameras

• NI CVS-1454, 1455, and 1456 Compact Vision Systems
  

Additional Driver Software

• The NI PCIe-1473R and NI PCIe-1473R-LX110 require NI FlexRIO software to access the DRAM resources in a LabVIEW FPGA project.

• The NI 1483 FlexRIO Adapter Module requires NI FlexRIO software.
  

System Requirements

NI Vision Acquisition Software 2016 Drops Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003

Product Security and Critical Updates

NI Application Software Support

NI Vision Acquisition Software .NET Support

New Features

• Support for LabVIEW 2016 (32- and 64-bit)
  

• Support for LabVIEW 2016 (32- and 64-bit)
  

• Support for LabVIEW 2016 (32- and 64-bit)
  

Updates and Improvements

Installation Instructions

• Insert the NI Vision Acquisition Software installation media.

• If you do not have autorun enabled, double-click autorun.exe. If you have autorun enabled, autorun.exe runs automatically.

• Follow the onscreen instructions.
  

Installing from an NI Software Suite or NI Product Bundle

Configuring NI-IMAQ

• Install your image acquisition device, and connect the camera. Refer to the device documentation for specific hardware installation instructions.

• Run NI MAX.
  

• Double-click the NI MAX icon on the desktop. You can use NI MAX to modify camera properties. Once you have saved these properties, they become the default settings for all NI-IMAQ applications.

• Expand Devices and Interfaces and NI-IMAQ Devices to display a list of the image acquisition devices installed on your computer.
  

• Select a camera file, and acquire an image.
  
  

• Use the Snap button to acquire and display a single image with the image acquisition device.

• Use the Grab button to acquire images continuously. A grab allows you to focus the camera.
  

• Click the plus sign next to the image acquisition device to expand the menu tree and list the available channels or ports. Right-click the channel or port to display a list of available cameras.

• Select the appropriate camera type from the list. Camera type selection varies according to the image acquisition device installed.

• To change the camera settings, modify the parameters at the bottom of the image viewer panel.

• You can acquire an image in the following ways:
  
  

Configuring a Remote PXI/Compact PCIe Image Acquisition Device

• Launch NI MAX.

• In the Configuration tree, expand Remote Systems.

• Expand the appropriate system.

• Expand Devices and Interfaces.

• Expand NI-IMAQ Devices.

• Expand the device you want to configure.
  

Configuring NI-IMAQdx

Installing the High Performance GigE Vision Driver

• Install the NIC.

• Right-click the NIC in the Device Manager, and select Update Driver.

• Choose Browse my computer for driver software.

• Browse to the driver location. The newest driver version is installed to <National Instruments>NI-IMAQdxStagingNI GigEVisionCurrent.

• Click Next.

• Click Close.
  

Installing the Universal GigE Vision Driver

• Install the NIC and any related drivers. Refer to the NIC device documentation for installation instructions.

• Enable jumbo frames (frame packet size is greater than 1,500 bytes) on your NIC.
  

  Note: The procedure for enabling jumbo frames on your NIC may vary by manufacturer. Refer to the NIC device documentation for more information about enabling jumbo frames.

• Right-click the NIC in the Device Manager, and select Properties.

• Click the Advanced tab, and Jumbo Frames will appear in the Property list if supported by your NIC.

• Select the largest frame size available and click OK.
  

• Disable the Windows Firewall or any additional third party firewalls on the port. Windows Firewall can be disabled on individual ports from the Advanced tab of the Windows Firewall applet.
  

Configuring NI-IMAQdx for Windows

• Connect the camera.

• Run NI MAX.
  
  

• Double-click the NI MAX icon on your desktop. You can use NI MAX to modify camera attributes. After you have saved these attributes, they become the default settings for all NI-IMAQdx or NI Vision applications.

• Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.

• For IEEE 1394 and USB3 Vision cameras, NI-IMAQdx may not be associated with the camera if a third-party driver is installed. If this is the case, change the associated driver by right-clicking the camera and selecting Driver»NI-IMAQdx.

• Select the camera from the list. You then can view or modify the camera attributes on the Camera Attributes tab located below the image viewer.
  

Configuring NI-IMAQdx for the LabVIEW Real-Time Module

• Install NI-IMAQdx software on your Windows development machine.

• Ensure that your RT target is connected to the same subnet as the Windows development machine.

• Run NI MAX.
  

• Double-click the NI MAX icon on your desktop.

• Expand the Remote Systems list in the configuration tree.

• Select your RT target in the list.

• Configure your network settings. Refer to the Remote Systems Help in NI MAX (Help»Help Topics»Remote Systems) for instructions about configuring network settings.
  

• Install NI-IMAQdx on the Real-Time target, using one of the following options:
  

• Click the Software item below the RT target in the configuration tree.

• Click Add/Remove Software on the NI MAX toolbar to launch the LabVIEW Real-Time Software Wizard.

• If you are given a choice of Recommended Software Sets, choose custom software installation and click Next to proceed with a custom installation.

• Select NI-IMAQdx, as well as any additional software you would like to install on the target machine.

• Click Next. Review the list of software you selected to install.

• Click Next to begin downloading the software to the target machine. When NI MAX has finished downloading the software, it restarts the remote device.

• Click Finish.
  

• Click the Software item below the RT target in the configuration tree.

• Click Add/Remove Software on the NI MAX toolbar to launch the LabVIEW Real-Time Software Wizard.

• Select Vision Software or NI CompactRIO under the version of the LabVIEW Real-Time Module you are using.

• Click Next.

• Select any additional add-ons you would like to install to the target machine. For some real-time targets, such as CompactRIO controllers, NI-IMAQdx or supported camera types will appear as an add-on.

• Click Next. Review the list of software you selected to install.

• Click Next to begin downloading the software to the target machine. When NI MAX has finished downloading the software, it restarts the remote device.

• Click Finish.
  

• Recommended Software Set on supported Smart Cameras, Embedded Vision Systems, Compact Vision Systems, and CompactRIO controllers
  

• Custom installation
  
  

• Connect your camera to your remote system.

• Press <F5> to refresh the NI MAX configuration tree. Your camera should be listed in the Remote Systems list.

  Tip: Press <F5> to refresh the configuration tree whenever you connect a new device to an RT target.

• Expand Devices and Interfaces»NI-IMAQdx in the configuration tree to display a list of the cameras installed on your computer.

• Select the camera from the list. You then can view or modify the camera attributes from the Camera Attributes panel located below the image viewer.
  

Automating the Installation of NI Products

• For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.

• For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.

• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

Known Issues

• Runtime installers are localized for deployment, but the development support installers are not. This could lead to a partially localized installation from a custom-built installer.
  

NI-IMAQ

• Changing the interface of an NI-IMAQ device in MAX requires a Refresh (F5) for the update to complete.
  

NI-IMAQdx

• NI-IMAQdx may not be able to open or reopen GigE Vision and USB3 Vision cameras which contain cameraextensiontag.

• Volume License Manager attempts to check out available NI Vision Development Module licenses before trying NI Vision Acquisition Software licenses.

• Attempts to extend the evaluation period for NI Vision Acquisition Software licenses from within LabVIEW or the LabVIEW Runtime are unsuccessful in connecting to the internet.

• Renaming a camera on some real-time targets may take a long time to complete.
  

NI-IMAQ I/O

• On real-time Compact Vision Systems, switching serial transceiver configuration between RS-485 and RS-232 is not available in MAX. The port can be switched between these modes in the BIOS.

• Only one NI PCIe-1473R framegrabber can use the virtual serial port at a time.

• LabVIEW projects targeting the DRAM banks on the PCIe-1473R may give a configuration error when attempting to compile bitstreams. In certain combinations of LabVIEW and NI FlexRIO 14.5 or older, the instructions to fix this issue may be incorrect.
  

Documentation and Examples

NI Vision Acquisition Software Documentation for NI MAX

• You can access the Measurement & Automation Explorer Help for NI-IMAQ and the Measurement & Automation Explorer Help for NI-IMAQdx from the NI MAX Help menu by selecting Help»Help Topics»NI Vision. These documents are installed to <National Instruments>MAXHelp.
  

NI Vision Acquisition Software Documentation for LabVIEW

• You can access the NI-IMAQ VI Reference Help, NI-IMAQdx VI Reference Help, and NI Vision-RIO VI Reference Help from the LabVIEW Help menu.

• NI Example Finder—Illustrates common applications you can create with NI Vision Acquisition Software. In LabVIEW, select Help»Find Examples. Click the Help button in the NI Example Finder to display the NI Example Finder Help. Vision Acquisition Software examples for LabVIEW are installed to <LabVIEW> is the location LabVIEW is installed.
  

NI Vision Acquisition Software Documentation for LabWindows/CVI

• NI-IMAQ Function Reference Help—Contains reference information about NI-IMAQ functions for LabWindows/CVI.

• NI-IMAQdx Function Reference Help—Contains reference information about NI-IMAQdx functions for LabWindows/CVI.

• Function panel help within LabWindows/CVI—Allows you to right-click within each function to access help for that function, control, function class, and function library. The NIIMAQdx.fp, and <National Instruments>CVIBin.

• Example programs are installed to
  
  

• versionsamples
  

NI Vision Acquisition Software for Eclipse and other Text-based Development Environments

• Getting Started with C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition with the NI Vision Development Module and NI-IMAQdx—Describes how to use the C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition to develop an example C application using the NI Vision Development Module API and/or NI-IMAQdx, and deploy it on a Linux remote target. This tutorial outlines the basic steps required to build and deploy an example application. This document is installed to <National Instruments>VisionHelp.

• To view text-based example programs, select Start»All Programs»National Instruments»Vision»Examples, and then select the driver you want to see examples for. You can also navigate to <Users>PublicPublic DocumentsNational Instruments.
  

Using NI Software with Microsoft Windows 10

Using NI Software with Microsoft Windows 8.1

Legal Information

• Notices are located in the <National Instruments> directories.

• EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

• Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.