下载中心

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Vision Builder for Automated Inspection 2010 Win32Eng 自动检测视觉生成器VBAI2010 LabVIEW2010版适用
NI机器视觉、图像处理软件。不需要学习太多编程知识，即时使用验证。可脱离LabVIEW编程环境独立完成检测任务。可应用于NI智能相机、嵌入式视觉平台等。亦可在LabVIEW2010中调用VBAI脚本。石鑫华视觉珍。

NI Vision Builder for Automated Inspection 2010 VBAI2010(2010.11.8):
百度网盘下载：
ZIP版：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看
ISO版：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看

NI官方下载：
请购买附件下载查看

NI Vision Builder for Automated Inspection 2010 Win32Eng 自动检测视觉生成器VBAI2010 LabVIEW2010版适用

http://pcmv.cn/thread-710-1-1.html?fromuid=9

(出处: 机器视觉论坛)

NI Vision Builder for Automated Inspection 2010 Readme

System Requirements

Installation Instructions

• Insert the Vision Builder AI DVD into your DVD-ROM drive. If the DVD does not run automatically, open Windows Explorer, right-click the DVD drive icon, and select AutoPlay.

• Select Install Vision Builder for Automated Inspection on the National Instruments Vision Builder for Automated Inspection screen.

• Vision Builder AI prompts you to enter your user information. Select one of the following options:
  
  

  If you choose to enter a serial number, enter the serial number found on your Certificate of Ownership card. Vision Builder AI automatically uses this serial number when you run the NI Activation Wizard.

• Install this product using the following serial number

• Install this product for evaluation
  
  

• Continue to follow the instructions on the screen.
  
  

Activation Instructions

• Launch Vision Builder AI.

• Click Yes when prompted to activate Vision Builder AI.

• Ensure that Automatically activate through a secure Internet connection is selected, and click Next.

• Enter your serial number, and click Next.

• Enter your registration information, and click Next.

• You can enter an email address to receive a copy of the activation code for your records.
  
  

Deployment Policy for Vision Builder AI

Licensing Options

• Vision Builder AI Full-Featured (778649-01)—Allows full access to all Vision Builder AI features, which can be used to configure, benchmark, and deploy inspections. This license does not include the Vision Builder AI Development Toolkit.

• Vision Builder AI Run-Time (779799-03)—Allows you to deploy existing inspections to a host machine and modify the control values for steps in an inspection. This license does not allow you to add steps to or remove steps from an inspection.

• Vision Builder AI Development Toolkit (779343-03)—Licenses only the Vision Builder AI Development Toolkit, which allows you to create custom steps for use in any Vision Builder AI application.
  
  

New Features

• New Detect Texture Defects step. The Detect Texture Defects step can identify defects in a region of interest based on a texture classifier that contains information about the texture.

• New Inspect Contours step. The Inspect Contours step can extract a contour from the inspection image, then compare the selected contour with a fitted contour or a template contour to detect contour defects.

• New Color Segmentation step. The Color Segmentation step can segment a color image based on a color classifier that contains information about learned color classes.

• New LabVIEW API. Use the LabVIEW API to control Vision Builder AI from a LabVIEW application. The LabVIEW API is a set of Vision Builder AI VIs accessible from the Functions»Vision and Motion palette on the LabVIEW block diagram.Note:  Do not use the ActiveX components to create new LabVIEW applications.

• New Inspection Interface Editor. Use the Inspection Interface Editor to create or edit a custom inspection interface VI. You can access the Inspection Interface Editor from the Inspection Interface Configuration tool, or from an Update Inspection UI step.

• New support for image variables, including local, shared, and network-shared variables.

• New LabVIEW project integration. LabVIEW project integration allows you to send data between a LabVIEW project and a remote target running Vision Builder AI without interrupting Vision Builder AI. You can access the shared variables used by a remote target running Vision Builder AI to easily transfer result data and images to LabVIEW. You can also launch Vision Builder AI locally from the LabVIEW project to edit inspections, variables, or target settings.

• Support for LabVIEW 2010. The NI Vision Development Module 2010 or later is required to develop a custom step with the Vision Builder AI Development Toolkit or to generate LabVIEW code from Vision Builder AI.

• New inspection templates. In the Configuration interface, select Files»New from Template to create an inspection from an existing template, or select Files»Save as Template to save an inspection as a template.

• New Snapshot Acquisition Mode for the Acquire Image (1394, GigE, or USB) step. Snapshot mode stops any active acquisition, configures a single image acquisition, acquires the image, and unconfigures the acquisition. For information about using Snapshot mode, refer to the Acquire Image (1394, GigE, or USB) FAQs topic in the NI Vision Builder for Automated Inspection: Configuration Help.

• New Get camera extra information from image option for the Acquire Image (1394, GigE, or USB) step. Use this option to retrieve additional information included in the image, such as a timestamp, camera specific data, or additional chunk data.

• Updated Read/Write I/O (NI-IMAQ I/O) step. The step supports the following new features:
  
  

• Reading TTL In 6, 7, 11, Iso Pwr, Encoder

• Writing TTL Out 0, 1, 2, 3, 4, TRIG 1, and TRIG 2
  
  

• Updated Read/Write I/O step supports reading encoder values for NI-IMAQ devices and NI Smart Cameras with quadrature encoder support.

• New Set to FAIL if any previous step fails or if current value of Inspection Status is FAIL option for the Set Inspection Status step. Select this option when you want the step to consider the current inspection status.

• Updated Calculator step supports creating point results.

• Updated Delay step supports using a previous measurement to define a delay.

• Updated Data Logging step supports logging to a local drive as a background task.

• Updated Image Logging step supports logging to a local drive as a background task.

• New support for the Path data type in custom inspection interfaces.

• Updated Select Inspection step supports using string variable values to explicitly specify a path to an inspection.

• Updated Vision Builder for Automated Inspection Development Toolkit now supports using the VBAI Get Global Variables VI to retrieve global variable values.
  
  

Updates

Remote Target Support

• NI 17xx Smart Cameras

• NI CVS-1450 Series Compact Vision Systems

• NI EVS-1463RT Embedded Vision Systems

• NI EVS-1464RT Embedded Vision Systems
  
  

PC-Based Image Acquisition and I/O Support

• National Instruments image acquisition devices

• IEEE 1394 industrial digital cameras

• GigE Vision cameras

• DirectShow-compatible USB cameras

• IP cameras

• digital or analog I/O from NI data acquisition (DAQ) devices

• serial devices
  
  

National Instruments Image Acquisition Devices

IEEE 1394 Cameras, GigE Vision Cameras, DirectShow-Compatible USB Cameras, and IP Cameras

• Launch MAX.

• In the MAX configuration tree, expand Devices and Interfaces to obtain a list of installed devices.

• Expand NI-IMAQdx Devices to obtain a list of available cameras.

• Right-click the camera and select Driver»NI-IMAQdx IIDC Digital Camera.
  
  

NI Analog and Digital I/O Devices

Serial Communication

Known Issues

General

• Vision Builder AI does not support U16 images.

• Vision Builder AI behaves unexpectedly or may not display an inspection image if the image is large and your computer is low on available memory.

• If you configure a step to generate a status based on pixel values and subsequently calibrate the image, the step will compare calibrated values against pixel-based limits and might fail.

• The Geometric Matching step generates an initialization error if the range specified for Scaled matches is large enough to cause the target to run out of memory.

• When connected to a remote target in the Configuration interface, the TCP Communication Terminal is not updated if you select an Operate»Run Inspection option.

• When connected to a remote target in the Configuration interface, the Serial Communication Terminal is not updated if you select an Operate»Run Inspection option.

• Calculator step performance may decrease if the Display Result Image for this State checkbox is enabled.

• The number of logged images resets if an inspection that contains an Image Logging step is closed and opened.

• When connected to a remote target, the Configuration interface does not execute the Cleanup state.

• After connecting to a remote target and starting an inspection in the Vision Builder AI Configuration interface, if you lose communication and reconnect to the target the inspection opens in the Vision Builder AI Inspection interface.
  
  

LabVIEW Project Integration

• You can create a new VI in the context of a remote target added in Vision Builder AI Mode. A VI created in this context cannot run or support shared variables. If you try to add a shared variable to the VI, the VI generates an error message indicating that the target does not support shared variables. Always create a VI in the context of My Computer or a remote target added in LabVIEW Real-Time Mode.

• When you add a NI Smart Camera or NI 1460RT Series Embedded Vision System to a LabVIEW project in Vision Builder AI Mode and the target and development computer are located on different subnets, shared variables are not automatically listed for the target. To list shared variables, right-click the target and select Connect.
  
  

Vision Builder AI Development Toolkit

• When using the Vision Builder AI Development Toolkit, you must close all open LabVIEW VIs before attempting to create a new step or importing a step from a previous version of Vision Builder AI.
  
  

Vision Builder AI ActiveX Component

• When using the Vision Builder AI ActiveX component, the <font face="" "="" style="margin: 0px; padding: 0px; overflow-wrap: break-word;">NIVBAITargetMode setting is not available. Therefore, the connection to a target always allows full control.
  
  

Windows Firewall

• Microsoft Windows 7, Windows Vista, Windows Server 2008, Windows Server 2003, or Windows XP with Service Pack 2 (SP2) or later installed
  When you launch Vision Builder AI, a dialog box may prompt you to allow Vision Builder AI to receive information over the network. Depending on your operating system, select Allow access or Unblock this program so that Vision Builder AI can communicate with your remote target.

• Microsoft Windows XP with Service Pack 1 (SP1) installed
  If the Microsoft Windows XP Internet Connection Firewall (ICF) is enabled, Vision Builder AI cannot discover or configure remote targets unless you disable the ICF. Perform the following steps to disable the Internet Connection Firewall:
  
  
  

• From your desktop, open Network Connections by selecting Start»Control Panel»Network Connections.

• Double-click the connection you want to modify.

• Click Properties.

• On the Advanced tab, clear the Protect my computer and network by limiting or preventing access to this computer from the Internet checkbox.
  
  

Additional ResourcesHow do I get started?

Where can I find reference information?

• NI Vision Concepts Help—Contains basic concepts of image analysis, image processing, and machine vision. This document also contains in-depth discussions about imaging functions for advanced users.

• NI Vision Builder for Automated Inspection: Configuration Help—Contains information about the Vision Builder AI Configuration interface, managing inspections and images, and creating steps for an inspection.

• NI Vision Builder for Automated Inspection: Inspection Help—Contains information about using the Vision Builder AI Inspection interface to run inspections.

• NI Vision Builder for Automated Inspection: ActiveX Component Reference Help—Contains information about the ActiveX objects available to embed Vision Builder AI inspections into ActiveX applications.
  
  

• Vision Builder for Automated Inspection Tutorial—Describes Vision Builder for Automated Inspection and provides step-by-step instructions for solving common visual inspection tasks, such as inspection, gauging, part presence, guidance, and counting.

• NI Vision Builder for Automated Inspection Development Toolkit Tutorial—Contains instructions for using LabVIEW to create custom steps for Vision Builder AI.
  
  

Where can I find examples?

Where else can I go for Vision Builder AI information?