下载中心

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

LabVIEW myRIO Toolkit 2014 Win32Eng LabVIEW 2014myRIO工具包

LabVIEW myRIO工具包提供了在myRIO学生嵌入式设备上开发和部署应用程序所需的工具。
LabVIEW myRIO工具包是LabVIEW的软件附件，提供了在myRIO学生嵌入式设备上快速开发和部署应用程序所需的驱动和工具。该工具包为myRIO设备上的每种I/O类型提供了基于配置的Express和Advanced I/O VI，可帮助学生快速构建想法并编写独立的应用程序。

2014myRIO
发布日期
2014/8/4
包含的版本
2014完整版
受支持的操作系统
Windows 8.1
Windows Server 2003 R2 32-bit
Windows XP (SP3) 32-bit
Windows Vista
Windows 8
Windows 7
Windows Server 2008 R2 64-bit
Windows Server 2012 R2 64-bit
应用程序位数
32位
语言
英文
校验和
文件大小: 2654091264 字节 (2.47 GB)
修改日期: 2014-09-30 22:41
MD5: c2d09bc4518e8b53a6320f393da48616（官方正确）
SHA1: becde79c376eca8da57465f144854087f852eeb4
SHA256: 895e94dcb7ff0671278e9ae1f861fc9945ad22a44e89a667e5432058c0c8742b
CRC32: 2136c942

百度网盘与NI官方下载地址：

LabVIEW myRIO Toolkit 2014 Win32Eng LabVIEW 2014myRIO工具包

http://pcmv.cn/thread-27587-1-1.html?fromuid=9

(出处: 机器视觉论坛)

LabVIEW 2014 myRIO Toolkit Readme

Overview

System Requirements

• (Optional for C Programming) LabVIEW 2014 Student, Full, or Professional Development System (32-bit)

• (Optional for C Programming) LabVIEW 2014 Real-Time Module

• At least 2 GB of disk space in addition to the LabVIEW-recommended minimum

• 1 GB RAM

• One of the following operating systems for application development:
  
  

• Windows 8.1 (32-bit and 64-bit)

• Windows 8 (32-bit and 64-bit)

• Windows 7 (32-bit and 64-bit)

• Windows Vista (32-bit and 64-bit)

• Windows XP Service Pack 3 Professional

• Windows Server 2012 R2 (64-bit)

• Windows Server 2003 R2 (32-bit)

• Windows Server 2008 R2 (64-bit)
  

• The myRIO Toolkit is compatible with 32-bit LabVIEW only. Therefore, you must have 32-bit LabVIEW installed even if you use a 64-bit operating system.

• You might need more memory than the LabVIEW-recommended minimum depending on the size of the application you design in LabVIEW on the host computer.

• Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). Refer to the National Instruments website for information about how this might affect your use of Windows Server 2003 R2 and what actions you might have to take.

• The myRIO Toolkit does not support the Windows Server non-R2 editions.
  

Installation Instructions

• Log in to the development computer as an administrator or as a user with administrative privileges.

• Insert NI myRIO Software Bundle DVD 1.

• Select Install NI LabVIEW 2014 myRIO Toolkit.

• (Optional for C Programming) Click the down arrow beside LabVIEW Support and select Install this feature to a local drive.

• Click Next and follow the instructions on the screen to install and activate the myRIO Toolkit.
  

Installing the USBLAN Driver in Microsoft Windows XP and Windows Server 2003

• Connect the NI myRIO to your computer after you install the myRIO Toolkit.

• In the Found New Hardware Wizard, select No, not this time and click Next.

• Select Install from a list or specific location and click Next.

• Select Include this location in the search and navigate to the National InstrumentsCompactRIOStagingUSBLANXP directory.

• Click Next to install the USBLAN driver. Click Continue Anyway when you see the Windows Logo testing warning.

• Click Finish.
  

Product Security and Critical Updates

New Features

Support for Multiple FPGA Personalities

• Default—Supports general I/O, protocols, and interrupt. Use the default personality for control applications.

• High Throughput—Supports high-speed analog or digital data access. Use the high-throughput personality for audio signals and projects in need of waveform data.
  

Switching between Default and High-Throughput FPGA Personalities

Using VIs Compatible with FPGA Personalities

• Default FPGA Personality—Includes VIs that are compatible with the default FPGA Personality.

• High Throughput FPGA Personality—Includes VIs that are compatible with the high-throughput FPGA Personality. This subpalette is available only when you install the high-throughput FPGA personality. Visit ni.com/myrio/more to download the high-throughput FPGA personality.
  
  The High Throughput FPGA Personality palette includes Low Level VIs and Express VIs that you can use to acquire and generate analog, audio, and digital signals in the n samples I/O mode. The n samples mode indicates that the NI myRIO acquires and generates multiple samples at the same time for a single channel or multiple channels. Use the n samples mode if you want to acquire finite high frequency signals or to generate finite time-varying signals.
  

Managing Interrupts

Controlling Joystick Devices

I/O Monitor

• Acquire or generate analog and digital signals.

• Communicate through protocols, including Inter-Integrated Circuit (I2C), Serial Peripheral Interface (SPI), and Universal Asynchronous Receiver/Transmitter (UART).

• Generate Pulse Width Modulation (PWM) signals and read values from the encoder.
  

• In the LabVIEW Getting Started window, click the Set Up and Explore link and select Launch the I/O Monitor.

• In the NI myRIO USB Monitor, click Launch the I/O Monitor.

• In the Project Explorer window of a myRIO project, right-click a myRIO target and select Launch IO Monitor from the shortcut menu.
  

Create Network Communication Project Wizard

• Shared Variable—Demonstrates how to use shared variables to read the latest NI myRIO user button status from a LabVIEW application running on the host computer.

• UDP Data Stream—Demonstrates how to use User Datagram Protocol (UDP) to continuously broadcast values from the host computer and receive the values on NI myRIO.

• UDP Message—Demonstrates how to use UDP to broadcast messages on demand from the host computer and receive the messages on the NI myRIO.

• Network Stream—Demonstrates how to use network streams to continuously stream values from a LabVIEW application running on the host computer to the NI myRIO.

• Network Stream Message—Demonstrates how to use network streams to transmit messages from a LabVIEW application running on the host computer to the NI myRIO.

• TCP Data Stream—Demonstrates how to use Transmission Control Protocol (TCP) to continuously stream values from the host computer to the NI myRIO.

• TCP Message—Demonstrates how to use TCP to transmit messages from the host computer to one or more NI myRIOs.

• Simple TCP Messaging—Demonstrates how to use TCP and meta data to transmit messages from the host computer to the NI myRIO.

• Queued Message—Demonstrates how to use a queued message handler to transmit messages from the host computer to the NI myRIO.
  

• Launch LabVIEW.

• Select File»Create Project to launch the Create Project dialog box.

• Select Sample Projects»myRIO to filter the Project List.

• Select Network Communication (myRIO) from the myRIO sample project list.

• Click Finish to launch the Create Network Communication Project wizard.
  

Miscellaneous Palette and VI Changes

• The Advance I/O palette is renamed the Low Level palette.

• The Utilities palette is renamed the Device Management palette.

• The Onboard and the Onboard Devices Express palettes no longer exist. VIs used to reside on these palettes now reside on both the Default FPGA Personality palette and the High Throughput FPGA Personality palette.

• The Analog Input, Analog Output, Digital Input, and Digital Output Express VIs include the following new options:
  
  

• I/O mode—Specifies the I/O mode this Express VI uses.

• Sample rate—Specifies the sampling frequency of the input or output signal.

• Samples—Specifies the number of samples you want to read or write.

• Latency—Displays the latency between two adjacent signal acquisition or generation iterations.
  

Known Issues

Bug Fixes

Accessing the Help

Finding Examples

Automating the Installation of NI Products

• For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.

• For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.

• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

How to Use NI Software with Microsoft Windows 8.x

Using NI Launcher

Pinning Frequently Used Applications

Finding All Programs

NI LabVIEW myRIO Toolkit Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

Legal Information

• Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

• EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

• Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.