下载中心

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI-DMM 2.2 Driver Win32/64Eng NI数字万用表驱动程序2.2下载

NI-DMM
NI-DMM支持使用NI数字万用表的客户。
NI-DMM是与所有NI可编程数字万用表(DMM)进行通信必需的NI仪器驱动程序。NI-DMM是一种兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供了一系列操作和属性，可以执行波形或信号发生器的功能，而且包含了交互式软件前面板和示例。

Win32/64Eng
2.2
文件大小: 33727488 字节 (32.17 MB)
修改日期: 2010-04-25 03:22
MD5: fe21b064f328f15375430ad235f6a9f3（官方正确）
SHA1: b8deb589a73241697b268f09d32f0cbc27f7c7b5
SHA256: 230a5691bfdf3a15a7a2a595f92152aea8ec6e3149434306022b8b40da25426a
CRC32: 05c7249f

百度网盘与NI官方下载地址：

NI-DMM 2.2 Driver Win32/64Eng NI数字万用表驱动程序2.2下载

http://pcmv.cn/thread-26256-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

NI-DMM 2.2 Readme File

• New Features in NI-DMM 2.2

• Supported DMMs

• System Requirements

• Installation Instructions

• Installed File Names and Locations
  

• Software Files

• Documentation Files
  

• Uninstalling/Modifying NI-DMM 2.2

• New Examples

• Obsolete/VIs Functions

• Changes in NI-DMM 2.2 from NI-DMM 2.1.2

• Changes in NI-DMM 2.1.2 from NI-DMM 2.1.1

• Changes in NI-DMM 2.1.1 from NI-DMM 2.1

• Changes in NI-DMM 2.1 from NI-DMM 2.0.1

• Changes in NI-DMM 2.0.1 from NI-DMM 2.0

• Changes in NI-DMM 2.0 from NI-DMM 1.6

• Known Issues
  

New Features in NI-DMM 2.2

• Support for the NI PCI-4070

• Support for the NI PXI/PCI-4070 devices to control an SCXI chassis that contains NI-DAQmx SCXI modules (NI PXI/PCI-4070 only)

• Support for the Self-Test and Self-Calibrate buttons in Measurement & Automation Explorer (MAX) for NI-DAQmx devices (NI PXI/PCI-4070 only)

• Support for LabWindowsTM/CVITM user protection
  

Supported DMMs

• NI PXI-4070

• NI PCI-4070

• NI PXI-4060

• NI PCI-4060

• NI PCMCIA-4050
  

System RequirementsMinimum System Requirements

• Processor: Pentium 200 MHz or equivalent

• RAM: 64 MB

• A PXI chassis and controller, a desktop computer, or a laptop with a PCMCIA slot

• 1/8 in. flathead screwdriver

• Number 1 Phillips screwdriver
  

Recommended System

• Processor: Pentium III/Celeron 600 MHz or equivalent

• RAM: 256 MB

• One of the following operating systems:
  

• Windows 2000

• Windows NT 4.0 service pack 6

• Windows XP

• Windows Me

• Windows 98SE
  

• One of the following Application Development Environments (ADE) is recommended:
  
  

• LabVIEW 6.1 or later

• LabWindows/CVI 6.0 or later

• Microsoft Visual C++ 6.0 or later

• Microsoft Visual Basic 6.0
  

Installation Instructions

• NI-DAQ version 7.0 or higher.

• NI-VISA or NI-VISA Run-Time Engine version 2.6.0 or higher.

• IVI Compliance Package 2.0 or higher.

• NI LabVIEW 7.0 Run-Time Engine.
  

Installed File Names and Locations

Software Files

Documentation Files

NI-DMM 2.2 Readme FileNI Digital Multimeters Getting Started Guide

NI Digital Multimeters Help

NI-DMM Instrument Driver Quick Reference Guide

Specifications for the NI PCMCIA-4050Specifications for the NI PXI/PCI-4060Specifications for the NI PXI/PCI-4070
NI PXI-4070 61/2 Digit FlexDMM Calibration ProcedureUninstalling/Modifying NI-DMM 2.2

• Open the Control Panel from the StartSettingsControl Panel Menu and select AddRemove Programs.

• Select National Instruments Software from the list provided and click Change or Remove.

• Select NI-DMM 2.2 from the list provided and choose the appropriate action.
  

New Examples

Obsolete Functions/VIs

Changes in NI-DMM 2.2 from NI-DMM 2.1.2

• Support for the NI PCI-4070 has been added.

• Support for the NI PXI/PCI-4070 devices to control an SCXI chassis that contains NI-DAQmx SCXI modules has been added (NI PXI/PCI-4070 only).

• Support in MAX for the Self-Test and Self-Calibrate buttons for NI-DAQmx devices has been added (NI PXI/PCI-4070 only).

• Support for the "break-on-library-error" feature in LabWindows/CVI (CVI user protection).
  

Changes in NI-DMM 2.1.2 from NI-DMM 2.1.1

• NI-DMM removes Offset Compensation Ohms capability for ranges 100 kΩ and greater.

• NI-DMM corrects the resistance reference adjustment function of the external calibration procedure.
  

Changes in NI-DMM 2.1 from NI-DMM 2.0.1

• Self-test and simulation have been added for the NI 4070.

• The 1 MΩ input resistance value is no longer valid for DC voltage measurements on the NI 4070.

• AC voltage measurements using the DC coupling on the NI 4070 have been improved to account for a computational error.

• A new error code, NIDMM_ERROR_INVALID_MEAS_COMP_DEST has been created. This error is returned if an Input Trigger or Sample Trigger source is set to the same value as the Measurement Complete (MC) destination.
  

Changes in NI-DMM 2.0.1 from NI-DMM 2.0

• The self-calibration algorithm for the PXI-4070 has been updated to improve the gain correction.

• Resistance measurements have been improved for low resolutions that enable both ADC calibration and offset compensated ohms.
  

Changes in NI-DMM 2.0 from 1.6

• The NI PCI-4060 supports Sample Trigger set to Software.

• Interaction problems with TestStand have been resolved.

• The DMM-SFP (soft front panel) supports device numbers greater than 15.

• Application examples were removed from the NI-DMM palette and are located at <LabVIEW>instr.libNIDMM idmm_apps.llb.

• Trigger Delay parameter can be set to Auto Delay OFF (-2).

• Range parameter can be set to AutoRange OFF (-2).
  

Known Issues

• Upgrading from NI-DMM 1.5 to NI-DMM 2.2 on a Windows NT 4.0 system can result in one or more error messages. To completely install NI-DMM 2.2 on such a system, you must acknowledge these error messages by clicking the OK dialog boxes.

• The IVI Configuration Store file format now requires that all names be case-sensitive. If you use logical names, driver session names, or virtual names in your program, make sure that the name you use matches the name defined in the IVI Configuration Store file exactly, without any variations in the case of the characters in the name.

• The NI 4070 can be programmed only with NI-DMM. NI-DAQ function calls and DAQ virtual channels are not supported by the NI 4070. Using NI-DAQ with the NI 4070 can cause an error that requires a system reboot.

• In Measurement & Automation Explorer (MAX) under the Configuring Device window for the NI 4070, Run Test Panels is grayed out.

• In MAX under the Configuring Device window for the NI 4070, Test Resources always indicates that the device has passed the test regardless of the condition of the device.

• If you are replacing the NI PXI-4060 with the NI PXI-4070 in an application that uses triggering, consider the following differences in behavior:
  
  
  If your application relies on the routing behavior of the NI 4060 by not explicitly calling niDMM Configure Measurement Complete Destination, you must modify your application by calling the VI/function. Alternately, the NI 4070 can emulate NI 4060 routing behavior by specifying the following registry key:
  
  HKEY_LOCAL_MACHINESoftwareNational InstrumentsNI-DMMCurrentVersionlegacyMCRoute
  
  where the value is a DWORD set to 1.
  
  Without this registry key, NI-DMM sets NIDMM_ATTR_MEAS_COMPLETE_DEST to NONE for the NI 4070. With this registry key, NI-DMM sets NIDMM_ATTR_MEAS_COMPLETE_DEST to the location where SCXI communication is configured in the application.

• The NI 4060 configured as an SCXI controller automatically sets the Measurement Complete (MC) destination to the location where SCXI is configured (external or internal PXI/SCXI trigger lines).

• The NI 4070 configured as an SCXI controller automatically sets the MC destination to NONE.
  

• There are known DLL collision issues with the Visual Basic debugger and National Instruments device drivers. A support DLL used by NI-DMM fails to load if Visual Basic has already loaded another DLL into the same address space. More information on this issue and solution are documented in KnowledgeBase entry 2Q1HG8A6. Refer to ni.com/support to access the KnowledgeBase.