下载中心

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

LabVIEW Report Generation Toolkit for Microsoft Office 1.1.1 for LabvIEW7报表工具包RGT1.1.1版适用LabVIEW7、LabVIEW7.1、LabVIEW7.1.1等版本

September 2005

较RGT1.1版本，最大升级是不再支持office97,需要office2000/xp/2003版本

System Requirements
The computer you are using must meet the following minimum system requirements to run the Report Generation Toolkit:

LabVIEW 7.0 or later
Microsoft Office 2000, XP, or 2003
Windows XP/2000/NT/Me/98
64 MB of RAM
40 MB of hard drive space
Note  The Report Generation Toolkit 1.1.1 is not compatible with Microsoft Office 97 or earlier.

适用于LabVIEW7.0/LabVIEW7.1/LabVIEW7.1.1（一般4代版本）
NI官方已经无法下载。仅提供百度云盘下载：
压缩文档有解压密码，请关注论坛微信公众号，回复密码获取
链接: 请注册视觉论坛用户，登陆后购买附件下载查看 提取码: 购买附件下载获取

LabVIEW Report Generation Toolkit for Microsoft Office 1.1.1 报表工具包RGT LV7

http://pcmv.cn/thread-22638-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

LabVIEW Report Generation Toolkit for Microsoft Office 1.1.1 Readme

System Requirements

• LabVIEW 7.0 or later

• Microsoft Office 2000, XP, or 2003

• Windows XP/2000/NT/Me/98

• 64 MB of RAM

• 40 MB of hard drive space
  

Installation

• Confirm that LabVIEW 7.0 or later is installed on the computer.

• Uninstall any previous versions of the Report Generation Toolkit.

• Windows 2000/NT/XP Log on as an administrator or as a user with administrator privileges.

• Insert the LabVIEW Report Generation Toolkit for Microsoft Office 1.1.1 installation CD and follow the instructions that appear on the screen.
  

Upgrade Issues

• Append Front Panel Image to Report VI—The Image Format input of the LabVIEW 6.1 version of this VI is a different enumerated type than the current toolkit version. Right-click the input and select Create»Control or Create»Constant from the shortcut menu to create a compatible control or constant.

• Append Table to Report VI—The connector pane position of the show grid lines input changed from the Report Generation Toolkit 1.0.1 version of the VI. Reconnect the original wire to the new input location.

• Get Report Settings VI—The cluster order of the font settings input changed from the Report Generation Toolkit 1.0.1 version of the VI. Right-click the output and select Create»Indicator from the shortcut menu to create a compatible indicator.

• Report Express VI—If a VI includes the LabVIEW built-in version of the Report Express VI on the block diagram, the VI breaks after you install the Report Generation Toolkit 1.1.1. Double-click the Report Express VI to launch its configuration dialog box, then click the OK button. Reconnect all wires to the Report Express VI.

• SubVIs that require relinking—You might need to relink the following subVIs after installation because the connector panes changed in the Report Generation Toolkit 1.1.1. Right-click the VIs and select Relink to SubVI.
  

• New Report

• Dispose Report

• Append Front Panel Image to Report

• Append Hypertext Link Anchor to Report

• Append File to Report

• Append Horizontal Line to Report

• Set Report Font